Neue GH604SS Uživatelský manuál

GH604SSUser ManualENHobGB

Provision for ventilationDetailed recommendations are contained in thefollowing British Standards Codes Of Practice: B.S.6172/B.S. 5440, Par. 2 and B.

5. Replace the rating plate (it is near the gas supplypipe) with the one for the new type of gas supply.You can find this plate in the package supplie

• or E — Earth terminalBefore carrying out the connection, make sure:1. The limiter valve and the electrical system can takethe appliance load (see t

2.3.4x4.min. 55 mmmin. 650 mm550 mm20+min. 100 mm30 mm470 mm20+min. 600 mm5.50 mm400 mmIf a furniture unit is installed at adistance of 400 mm abo

min 12 mm60 mmBAmin 5 mm(max 150 mm)A. Removable panelB. Space for connectionsKitchen unit with ovenThe electrical connection of the hob and the oven

Gas burners for NATURAL GAS G20 20 mbarBURNER NORMAL POWER kW MINIMUM POWER kW INJECTOR MARKRapid 3,0 0,75 119Semi-rapid 2,0 0,45 96Auxiliary 1,0 0,33

GB GREAT BRITAIN – Customer Care and ServiceStandard Guarantee Conditions and Exclusions. Allour products come with a 24 month warranty. To seeour gua

17

18

19

ContentsSafety information 2Safety instructions 3Product description 6Daily use 6Hints and tips 7Care and cleaning 7Troubleshooting8Installation 9Tech

867345008-B-022018

• Do not operate the appliance by means of an external timer or separateremote-control system.• WARNING: Unattended cooking on a hob with fat or oil c

• If the appliance is installed above drawers makesure that the space, between the bottom of theappliance and the upper drawer, is sufficient for airc

• Used oil, that can contain food remnants, can causefire at a lower temperature than oil used for the firsttime.• Do not put flammable products or it

Product descriptionCooking surface layout21 341Rapid burner2Semi-rapid burner3Auxiliary burner4Control knobsControl knobSymbol Descriptionno gas suppl

If after some tries the burner does notlight, check if the crown and its cap arein correct positions.Warning! Do not keep the control knobpushed for m

• Wash stainless steel parts with water, and then drythem with a soft cloth.• To remove burnt food, fat and stubborn stains letthem soak in a small am

Problem Possible cause RemedyThe flame ring is uneven. Burner crown is blocked with foodresidues.Make sure that the injector is notblocked and the bur